MeacoWall 400i Wall Mounted Dehumidifier – MeacoWall400i

Meaco 400i Swimming
Pool Dehumidifier

• 58 litre per day extraction rate
• Wall mounted in adjacent room and ducted through the wall
• Comes with Wired Thermo Humidistat
  and Internal Backup Humidistat
• Plastic housing 

Meaco’s range of
swimming pool dehumidifiers are the perfect solution to protect your swimming
pool hall from damage caused by mold, damp, and condensation. The excess
humidity can cause an array of problems leading to an unhealthy environment.
The unit can be set up with many different options (detailed below) and can
also be combined with your boiler to not only dry the air but also heat it via
the low pressure hot water system. This can add up to 2.9kW of heat to the pool
area. The Meaco swimming pool dehumidifiers are very energy efficient with the
energy consumption rated as low as 0.510kW/L. This means they are not only
cheaper to run than some other units but they are also packed full of features
and optional extras so you can tailor the dehumidifier to your exact
requirements. 

The dehumidifier
will need to be wall mounted in an adjacent room and ducted through the wall.
As a guide, if the air temperature is at least 2°C warmer than the water
temperature and you use a swimming pool cover then the Meaco 400i can control
the humidity for a pool with a surface area of around 30 square meters. 

 

 

Features:

• Protects
  swimming pool areas from damp, mould, and condensation

• Wall
  mounted in adjacent room and ducted through the wall

• An
  excellent 58 litre per day extraction rate

• Low
  energy consumption (0.510kW/L) thanks to an energy efficient rotary
  compressor

• Low
  noise level (47dB(A) at one metre)

• Comes
  with Wired Thermo Humidistat and
  Internal Backup Humidistat

• Plastic
  housing